| Technical Specifications General  |  | | Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion) | | | | Bit Depths: 24 bit I/O, 32 bit processing | | | | CardBus Card Specification: | | | | | - Form factor: PCMCIA Type II | | - Bus-Mastering DMA subsystem reduces CPU usage |
| | | | E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits) | | | | Hardware-accelerated, 32-channel mixing, and multi-effects processing | | | | Zero-latency direct hardware monitoring w/effects | | | | ASIO 2.0, WDM/MME/DirectSound Drivers | | | | EDI (E-MU Digital Interface) proprietary 64-channel audio link over CAT-5 cable | | | | Anti-Pop speaker protection minimizes noise during power on/off | | | | Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync) |
Combo Microphone Preamplifier/Hi-Z/Line Inputs (2) | | | Type: E-MU® XTC™ combo mic preamp and Hi-Z/line input w/ Soft Limiter | | | | Gain Range: +60dB | | | | Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB | | | | Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB | | | | Hi-Z Line Input: | | | | | - Input Impedance: 1Mohm | | - Max Level: +18dBV (20.2dBu) | | - Dynamic Range (A-weighted, 1kHz, min gain): 118dB | | - Signal-to-Noise Ratio (A-weighted, min gain): 118dB | | - THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%) |
| | | | Microphone Preamplifier: | | | | | - Input Impedance: 1.5Kohms | | - Max Level: +6dBV (+8.2dBu) | | - EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu | | - Signal-to-Noise Ratio (A-weighted, min gain): 119dB | | - THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%) | | - Phantom Power: 48V | | - Soft Limiter: 5dB max compression (software selectable) |
|
Analog Line Inputs (4) | | | Type: servo-balanced, DC-coupled, low-noise input circuitry | | | | A/D converter: AK5394A | | | | Level (software selectable): | | | | | - Professional: +4dBu nominal, 20dBu max (balanced) | | - Consumer: -10dBV nominal, 6dBV max (unbalanced) |
| | | | Frequency Response (20Hz-20kHz): +0.0/-.03dB | | | | Dynamic Range (1kHz, A-weighted): 120dB | | | | Signal-to-Noise Ratio (A-weighted): 120dB | | | | THD+N (1kHz at -1dBFS): -110dB (.0003%) | | | | Stereo Crosstalk (1kHz at -1dBFS): < -120dB |
Analog Line Outputs (6) | | | Type: balanced, AC-coupled, 2-pole low-pass differential filter | | | | D/A converter: CS4398 | | | | Level (software selectable): | | | | | - Professional: +4dBu nominal, 20dBu max (balanced) | | - Consumer: -10dBV nominal, 6dBV max (unbalanced) |
| | | | Frequency Response (20Hz - 20kHz): 0.0/-.06dB | | | | Dynamic Range (1kHz, A-weighted): 120dB | | | | Signal-to-Noise Ratio (A-weighted): 120dB | | | | THD+N (1kHz at -1dBFS): -105dB (.0006%) | | | | Stereo Crosstalk (1kHz at -1dBFS): < -115dB |
Headphone Amplifier (2 Stereo: MicroDock M and Card) | | | Type: linear power amplifier | | | | D/A converter: CS4398 (dock), AK4396 (card) | | | | Gain Range: 85dB | | | | Maximum Output Power: 50mW (dock), 20mW (card) | | | | Output Impedance: 22ohms | | | | Frequency Response (20Hz-20kHz): +0.0/-0.07dB | | | | Dynamic Range (A-weighted): 118.5dB (dock), 115dB (card) | | | | Signal-to-Noise Ratio (A-weighted): 118dB (dock), 115dB (card) | | | | THD+N (1kHz, max gain): 600ohm load: -96dB (dock), -96dB (card) | | | | Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB |
Phono Input (stereo) | | | Type: RIAA equalized phono input | | | | Maximum level: | | | | | - Professional: 60mV RMS | | - Consumer: 15mV RMS |
| | | | Input Impedance: 47Kohm | | | | Frequency Response (20Hz - 20kHz): +0.1/-0.3dB | | | | Dynamic Range (A-weighted): 96dB | | | | Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB | | | | THD+N (1kHz, 15mV RMS input): -90dB (.003%) | | | | Stereo Crosstalk (1kHz at -1dBFS): < -80dB |
Digital I/O | | | S/PDIF: | | | | | | - 2 in/2 out coaxial (transformer coupled) | | | - 2 in/2 out optical (software switched with ADAT) | | - AES/EBU or S/PDIF format (software selectable) |
| | | | ADAT: | | | | | - 8 channels, 24-bit @ 44.1/48kHz | | - 4 channels, 24-bit @ 88.2/96kHz (S-MUX compatible) | | - 2 channels, 24-bit @ 176.4/192kHz |
| | | | MIDI | | | | | - 2 in, 2 out |
|
Synchronization | | | Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz | | | | External sample rate sync via | | | | | | - ADAT (44.1 - 192kHz) | | - Optical S/PDIF (44.1 - 96kHz) | | | - Coaxial S/PDIF (44.1 - 192kHz) |
|
 Retail Box Contents | | | E-MU 02 CardBus Card | | | | E-MU MicroDock M | | | | EDI (E-MU Digital Interface) cable (1 meter) | | | | Universal power adapter | | | | MIDI breakout cable | | | | CardBus Card carrying case | | | | Quick Start installation guide | | | | E-MU Digital Audio Systems CD-ROM | | | | | - Windows 2000, XP and XP x64 Drivers | | - E-MU PatchMix DSP | | - E-MU Power FX | | - E-MU E-DSP Effects Library | | - Owner's Manual and Tutorials |
| | | | E-MU Production Tools Software Bundle CD-ROM | | | | | - Cakewalk SONAR LE | | - Steinberg Cubase LE | | - Steinberg Wavelab Lite | | - IK Multimedia AmpliTube LE | | - IK Multimedia T-RackS EQ | | - Minnetonka diskWelder BRONZE | | - SFX Machine LT | | - E-MU Proteus X LE (over 1000 sounds included) |
|
Minimum System Requirements | | | Intel® or AMD® processor - 1 GHz or faster | | | | Intel, AMD or 100% compatible motherboard & chipset | | | | Microsoft® Windows® 2000 (SP4), XP (SP 2) or Windows XP x64 | | | | 256MB System RAM | | | | 900MB of free hard disk space for full installation | | | | Available Type II CardBus slot (PCMCIA slot)* | | | | CD-ROM/CD-RW or DVD-ROM drive required for software installation | | | | XVGA Video (1024 X 768) |
*Simultaneous input/output channel count may vary depending on the PCMCIA controller in your system.
Tested Laptop Systems:
| Laptop* | PCMCIA Controller | | IBM ThinkPad T40 (X5650) | Texas Instruments CardBus RACEway | | Compaq Presario 2100 (X5628) | O2 Micro OZ 6912/711E0 | | Dell Inspiron 600m (C13102) Laptop | O2 Micro 0Z711ECI Smart Card Bus | | HP Pavilion zv5000 1.5 Ghz | TI PCI-1520 | | IBM Thinkpad T23 1.2 Ghz | TI PCI-1420 | | IBM Thinkpad A22P Pentium III 933MHz Laptop | TI PCI-1450 | | Dell Latitude (X5502) Laptop | TI PCI-1420 | | Sony VAIO® PCG-V505EX | Ricoh R/RL/RT/RC/5C475(II), R5C520 | | NEC VERSA LXI (X5138) Laptop | TI PCI-1450 | | HP Pavilion N5310 Intel Celeron 750MHz (X5140) | TI PCI-1420 | | Toshiba A75 (X5953) P4 2.8 GHz Laptop | ENE Technology CD-1410 |
(Performance depends on many variables, including PCMCIA controller, RAM, system configurations, etc...)
*All tests were performed on Windows XP (Service Pack 2) or Windows 2000
(Service Pack 4)
To check the PCMCIA controller in your system, please do the following:
For Windows XP and Windows 2000 | 1: | | Click Start -> Control Panel/System | | 2: | | When the System Properties window appears, click the Hardware tab | | 3: | | In the Hardware tab, click Device Manager | | 4: | | In the Device Manager, double click the PCMCIA adapters | | 5: | | Check the PCMCIA controller model | | 6: | | Close the Device Manager, System Properties and Control Panel to exit. |
Latest Drivers/Applications/Documents
Always update your system with the latest software for improved features and functionality.
To get the latest driver/application/document updates for your 1616/1616M product go to http://www.emu.com/support/
Check the documentation that came with your laptop to find out how to get the latest BIOS and driver updates for your particular system.
Повече от производителя |
