| Internal processing | 32bit (Accumulator 58bit) |
| Number of scene memories | 99 |
| Sampling frequency | Internal | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| External | Normal rate: 44.1kHz-10% - 48kHz+6%
Double rate: 88.2kHz-10% - 96kHz+6% |
| Signal delay | Less than 1.6ms CH INPUT to STEREO OUT
(@Sampling frequency = 48kHz)
Less than 0.8ms CH INPUT to STEREO OUT
(@Sampling frequency = 96kHz) |
| Fader resolution | 100mm motorized x17 |
Total harmonic distortion *
Input GAIN=Min. | CH INPUT to STEREO OUT
Less than 0.05%, 20Hz to 20kHz @+14dB into 600ohms
Less than 0.01%, 1kHz @+24dB into 600ohms
(@Sampling frequency = 48kHz)
Less than 0.05%, 20Hz to 40kHz @+14dB into 600ohms
Less than 0.01%, 1kHz @+24dB into 600ohms
(@Sampling frequency = 96kHz) |
| Frequency response | CH INPUT to STEREO OUT
0.5, -1.5dB, 20Hz - 20kHz @+4dB into 600ohms
(@Sampling frequency = 48kHz)
0.5, -1.5dB, 20Hz - 40kHz @+4dB into 600ohms
(@Sampling frequency = 96kHz) |
Dynamic range
(maximum level to noise level) | 110dB typ. DA Converter (STEREO OUT)
106dB typ. AD+DA (to STEREO OUT) @fs=48kHz
106dB typ. AD+DA (to STEREO OUT) @fs=96kHz |
Hum & noise level **
(20Hz-20kHz)
Rs=150ohms
Input GAIN=Max
Input PAD=0dB
Input PAD=0dB
Input sensitivity=-60dB | -128dB Equivalent Input Noise.
-86dB residual output noise. STEREO OUT
STEREO OUT off.
-86dB (90dB S/N)STEREO OUT
STEREO fader at nominal level and all CH INPUT faders at minimum level.
-64dB (68dB S/N) STEREO OUT
STEREO fader at nominal level andone CH INPUT fader at nominal level |
| Maximum voltage gain | 74dB CH INPUT (CH1-12) to STEREO OUT/OMNI (BUS) OUT
40dB CH INPUT (CH13-16) to STEREO OUT
74dB CH INPUT (CH1-12) to OMNI (AUX) OUT (via pre input fader)
74dB CH INPUT (CH1-12) to MONITOR OUT (via STEREO BUS) |
Crosstalk(@1kHz)
Input GAIN=min | 80dB adjacent input channels (CH1-12)
80dB adjacent input channels (CH13-16)
80dB input to output |
