The world's first large diaphragm condenser studio microphone with seamlessly variable Polar Patterns, Filter and Pad located conveniently on the microphone body.

The NT2000's state of the art surface-mount electronics combined with the new Australian designed and manufactured HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.
- Large 1" (25mm) HF1 gold sputtered capsule
- Continuously variable polar pattern, from Omni to Cardiod to Figure 8 controlled on the mic
- Continuously variable PAD and High-Pass Filter
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- High strength welded and heat treated steel mesh head
- High strength heat treated steel mesh head
- Internal capsule shock mounting

Specifications
Power                             P48 (48V) phantom supply
Acoustic Principle             Pressure, Pressure gradient
Directional Pattern           Continuously variable multi pattern - Omni, through Cardioid to                                           Figure 8
Frequency range              20 Hz - 20 kHz
Output impedance            200Ω
Signal noise ratio             >87 dB SPL (A - weighted per IEC651)
Equivalent noise              7 dB SPL (A - weighted per IEC651)
Maximum SPL                 147dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum output voltage     +15dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity                     -36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight                           831gm
Dimensions                    208mmH x 55mmW x 55mmD

 Included Accessories
RC1 (case), SM2 (shock mount)

 Optional Accessories
WS2 windshield, M2 stand mount, PSA1 studio arm, DS1 desk stand and tripod

Повече от производителя